02-03-2013, 06:26 PM
Picked up a "Do-All" commercial belt sander from probably the 60's or 70's.
Runs pretty good, and all there, (Electrics are old, being changed,) But quite a mess, must have been in a body shop or someplace as it is covered in many coats of overspray, and lots of paint spilt on it.
Have it dismantled and partly stripped. Trying to locate a local supplier of the belts which are 3in x 48 inch.
Runs pretty good, and all there, (Electrics are old, being changed,) But quite a mess, must have been in a body shop or someplace as it is covered in many coats of overspray, and lots of paint spilt on it.
Have it dismantled and partly stripped. Trying to locate a local supplier of the belts which are 3in x 48 inch.
sasquatch, proud to be a member of MetalworkingFun since Jul 2012.