(04-12-2013, 06:28 PM)EdK Wrote:(04-12-2013, 05:14 PM)dallen Wrote: way back in post 1053 I posted a picture of a sheave that I made and John aka doubleboost asked how I cut the key way, well I decided to also change the one on the motor spindle so when I broached the keyway I just happened to have the camera with me.
so here's a shot of how I broached the keyway. And can anyone tell me the name of that high pressure green lube I have swabbed on the broach, I know it comes in a white plastic jar.
It's probably extreme pressure grease made by this company. I have a tube of it. It's commonly used on dead centers and available from McMaster.
http://www.cmdlubeoil.com/
I would like to see some more details on your broaching tool. I assume you made that?
Thanks,
Ed
me make a broach, no I bought it, its a standard 3MM broach and bushing from Dumont.
DA
dallen, proud to be a member of MetalworkingFun Forum since Apr 2012.
If life seems normal, your not going fast enough!
If life seems normal, your not going fast enough!