04-21-2013, 08:11 PM
The weather is keeping me in the shop too.
A quick repair on two tractor hubs. The two part seals broke loose from the hubs and wore them bad. Set up here to bore the hub to 4.000 then pressed a sleeve made from 4 inch od pipe, and rebored to fit the seals.
Forgot to get a photo of the finished product.
A quick repair on two tractor hubs. The two part seals broke loose from the hubs and wore them bad. Set up here to bore the hub to 4.000 then pressed a sleeve made from 4 inch od pipe, and rebored to fit the seals.
Forgot to get a photo of the finished product.
Free advice is worth exactly what you payed for it.
Greg
Greg