09-11-2013, 06:31 AM
OK, so I don't want threads that are not properly measured! Ever! Ever!
Please confirm that the following is correct (or incorrect).
In my newly acquired 15th Edition (1956) Machinery's Handbook, I find a table that gives "Dimensions Over Wires...US Standard".
For a 7/16- 14 thread I should use .050 wires, and have a diameter of 0.4793 as measured over the wires.
Thanks, Larry
Please confirm that the following is correct (or incorrect).
In my newly acquired 15th Edition (1956) Machinery's Handbook, I find a table that gives "Dimensions Over Wires...US Standard".
For a 7/16- 14 thread I should use .050 wires, and have a diameter of 0.4793 as measured over the wires.
Thanks, Larry
LJP, proud to be a member of MetalworkingFun Forum since Aug 2013.