12-28-2013, 04:15 PM
I finished up the 316SS motorcycle axles, including the metric threads. Came out beautiful, though I forgot to take photos before Neil and I left the shop.
Tomorrow I'll be remaking the blank for the 70 tooth gear, this time in annealed 4150 steel instead of "scrapbinium." I'll also be making blanks for the 30 and 35 tooth gears I would also like to have, those will be made from a piece of Ø2-1/2" 1144SP which I bought along with the 4150.
I'll see if Neil can take some photos of the finished parts and post them. I don't think he's posted here yet, so I hope he's not been booted off yet.
Tomorrow I'll be remaking the blank for the 70 tooth gear, this time in annealed 4150 steel instead of "scrapbinium." I'll also be making blanks for the 30 and 35 tooth gears I would also like to have, those will be made from a piece of Ø2-1/2" 1144SP which I bought along with the 4150.
I'll see if Neil can take some photos of the finished parts and post them. I don't think he's posted here yet, so I hope he's not been booted off yet.