Started working on my version of Tom's Carriage stop, not to change his but to work with what I already had.
Which was this hunk of cast iron that I had already made into a clamp for the 12" Lathe.
I had originally started to make this into an adajustable stop from the lay out lines that I had on it but never finished it for some reason but now it looks like this, I still have a couple operations left to finish things like the dowel pin and breaking all the corners which I don't have a Chamfer Cutter for so will probably round over all the top edges not sure yet.
Which was this hunk of cast iron that I had already made into a clamp for the 12" Lathe.
I had originally started to make this into an adajustable stop from the lay out lines that I had on it but never finished it for some reason but now it looks like this, I still have a couple operations left to finish things like the dowel pin and breaking all the corners which I don't have a Chamfer Cutter for so will probably round over all the top edges not sure yet.
dallen, proud to be a member of MetalworkingFun Forum since Apr 2012.
If life seems normal, your not going fast enough!
If life seems normal, your not going fast enough!