Todays Project - What did you do today?

[Mayhem]

I've been slowly making some room in my workshop to accommodate my lathe, mill, shaper and drill presses. My workshop is 12.2m x 7.6m x 3.0m (40' x 25' x 9'10") and when I built it I partitioned off one of the bays, giving me a space 7.6m x 4m (25' x 13'4"). Initially this space was used to store and repair sound and lighting equipment for an after hours business I was a co-owner of.

Now that I am no longer involved in that business, I have decided this will become my machine area. Welders, grinders and the like will be back in the rest of the shop as they always have/had been.

I've put some framework in place so that I can sheet the walls in chipboard. The last thing I want is metal chips filling the voids in the wall sheets and rusting them out. My brother-in-law has just fitted a s/h evaporative A/C unit that he gifted me, which I plumbed in yesterday.

Back of the workshop looking toward my bench. There is a door between the bench and the fire extinguisher, and the lathe will live along the wall on the right. The outboard end of the spindle will be about 1m (3'3") from the door. Behind the whiteboard on the left is my computer desk.
   

I've decided to move the mill from the corner on the right to the corner on the left, as when looking at the equipment footprints on paper/CAD it will give me more room.
   

There is still a lot of clutter and stuff to be moved out. I will free up a lot of space just by putting the mill is back together! Once finished, I'll post in the "let's see your workshop thread".