07-12-2014, 04:48 PM
I finished up the front bracket today. Then I tackled the read head bracket to lengthen the slots so I could drop it down to work with the new brackets. I sure did a crappy job of making it because surfaces that should be parallel and corners that should be square aren't. So I ended up spending much more time on it than I had anticipated but at least it's done properly now. Live and learn.
Next is the rear bracket and then I can put it all back together and test it out. Oh, that's right. I need to get a 7mm bolt and modify it for the cross slide lock.
Oops! It looks like I forgot to remove the blue juice from the read head bracket.
Ed
Next is the rear bracket and then I can put it all back together and test it out. Oh, that's right. I need to get a 7mm bolt and modify it for the cross slide lock.
Oops! It looks like I forgot to remove the blue juice from the read head bracket.
Ed