Todays Project - What did you do today?

[dallen]

I did some more file work on the barrel today, and worked on the sear so that it engages the hammer like it should (I think) won't know for sure until the main spring is in place to put pressure on the two parts.

had some fun drilling the hole for the sear pin last night when it decided to locate its self in the edge of he slot for the sear spring as you can see in this not so very clear photo the two shiny spots are were the drill came thru the very edge of the slot. The sides of the slot couldn't of been and 1/8 of and inch higher, anyway its on the inside so only people that will know is me and


The sear pinned in place had to do a ton of filing on it and the hammer to get them to work together, now just have to wait until the spring is in place. Sear spring is working ok anyway it hasn't broken yet which is saying a lot since I made it from a hunk of trailer spring off a car hauler trailer.



then there is the out of focus shot of me sanding on the finger lever. Damn but you would think a 1000 dollar camera would take a better photo then that, hell it should at least focus its self.


DA