11-21-2014, 02:36 PM
Those are some $hitty crimps. Also, they should be using either ring terminals or the locking type spade terminal. Especially on the high voltage wiring. Any chance of you taking a picture of the wiring diagram and posting it? I'm guessing it's probably like the one in my lathe manual, and I use that term lightly. Mine doesn't have a wiring diagram but what's called a ladder diagram which is intended to show current flow and not necessarily how it's wired up.
Here's a reasonably decent, brief description of the differences between a ladder diagram and a wiring diagram, if anyone is interested.
http://www.automatedbuildings.com/news/s...brese.html
Ed
Here's a reasonably decent, brief description of the differences between a ladder diagram and a wiring diagram, if anyone is interested.
http://www.automatedbuildings.com/news/s...brese.html
Ed