02-20-2015, 06:34 PM
Had to get my hands dirty again, enough of that wimpy wood stuff.
Started building a work stop for my non Kurt vice, but I think I stole they're design. Machined the arm out of a 1 inch square of mystery stainless. Not bad to work with, work hardens a bit if you don't keep the feed on. Here's a good example of non stress relieved metal. The clamp bolt definitely won't rattle when its slacked off a bit.
Started building a work stop for my non Kurt vice, but I think I stole they're design. Machined the arm out of a 1 inch square of mystery stainless. Not bad to work with, work hardens a bit if you don't keep the feed on. Here's a good example of non stress relieved metal. The clamp bolt definitely won't rattle when its slacked off a bit.
Free advice is worth exactly what you payed for it.
Greg
Greg