05-22-2015, 09:09 AM
probably nothing, from the skim cut I did across the backside it looks like its going to have a bunch of slag inclusions in it probably from me pouring too slow.
But it turned out nice and soft, looks like I was spot on with the temp and such did have one little moment with the burner but all in all I would say a good pour. To get good machineable cast iron you have to really stay on top of your game.
The part is intended to be a backing plate for a 5C Collet Chuck that I was given/traded for some cad work.
DA
But it turned out nice and soft, looks like I was spot on with the temp and such did have one little moment with the burner but all in all I would say a good pour. To get good machineable cast iron you have to really stay on top of your game.
The part is intended to be a backing plate for a 5C Collet Chuck that I was given/traded for some cad work.
DA
dallen, proud to be a member of MetalworkingFun Forum since Apr 2012.
If life seems normal, your not going fast enough!
If life seems normal, your not going fast enough!