08-31-2015, 06:06 PM
Needed a 6mm key but only had 1/4" keystock, so lacking a surface grinder, I mounted the magnetic chuck (that arrived today) on the mill, put a precut piece of the keystock on the magnet along with a piece of angle to stop it from moving around. It did that before I put the angle on it. Took light cuts of 0.003" - 0.004" and here's the finished product. Fits perfect.
Logan 200, Index 40H Mill, Boyer-Shultz 612 Surface Grinder, HF 4x6 Bandsaw, a shear with no name, ...
the nobucks boutique etsy shop | the nobucks boutique
the nobucks boutique etsy shop | the nobucks boutique