02-22-2016, 06:38 PM
This one will be done this evening. It'll be a lite for the mill that goes around the spindle. The LED ring showed up today, it was under $6 with free shipping for two!
The second pic shows plastic resin in a mold just starting to cure (that's the brighter white spots). Shortly (if not already since it only takes 10-15 mins) it'll be completely white and come out of the mold. Then into the lathe to cut a slot for the ring and bore the center out to fit over the spindle.
The second pic shows plastic resin in a mold just starting to cure (that's the brighter white spots). Shortly (if not already since it only takes 10-15 mins) it'll be completely white and come out of the mold. Then into the lathe to cut a slot for the ring and bore the center out to fit over the spindle.
Logan 200, Index 40H Mill, Boyer-Shultz 612 Surface Grinder, HF 4x6 Bandsaw, a shear with no name, ...
the nobucks boutique etsy shop | the nobucks boutique
the nobucks boutique etsy shop | the nobucks boutique