06-01-2016, 07:13 PM
That I remembered. I tacked it on the ends and middle then the opposite side (square tube) on the opposite sides of where I had just tacked. Then worked my way around to the different spots with longer welds. Probably overkill with the thickness of that steel (5/16").
Logan 200, Index 40H Mill, Boyer-Shultz 612 Surface Grinder, HF 4x6 Bandsaw, a shear with no name, ...
the nobucks boutique etsy shop | the nobucks boutique
the nobucks boutique etsy shop | the nobucks boutique