06-24-2016, 03:59 AM
Amongst other things such as helping my daughter move house and helping a mate change the clutch in his Land Rover (as seen in the background below) I did a little carpentry. Probably not going to get as many oohs and aahs as Greg's desk....
Cunningly concealed within these masterpieces are a dividing head along with the tailstock and sundries, ready to make their way across Australia. That's 31kg on the scales, about 70lb in the old money. The other box weighed in at 10kg, it has, along with the tailstock, the dividing plates, fingers and crank, the chuck jaws and whatever else I could remove from the thing to get the weight of the main box down, still weighs as much as a 9-year-old child. The rope handle is through the spindle so no, it's not going to pull the lid off the box!
Cunningly concealed within these masterpieces are a dividing head along with the tailstock and sundries, ready to make their way across Australia. That's 31kg on the scales, about 70lb in the old money. The other box weighed in at 10kg, it has, along with the tailstock, the dividing plates, fingers and crank, the chuck jaws and whatever else I could remove from the thing to get the weight of the main box down, still weighs as much as a 9-year-old child. The rope handle is through the spindle so no, it's not going to pull the lid off the box!
Lathe (n); a machine tool used in the production of milling machine components.
Milling Machine (n); a machine tool used in the production of lathe components.
Milling Machine (n); a machine tool used in the production of lathe components.