12-13-2016, 09:41 AM
(12-13-2016, 09:18 AM)f350ca Wrote: Nice work Darren, but I'd have cut the bolt shorter.
If you ask an engineer if the glass is half full or half empty he'll say its twice as big as it needs to be.
Thanks Greg. I cannot cut the bolt, as you need to screw the lid down. With the lid off the media only moves in one direction (from the bottom of the bowl up to the top, where it cascades down). With the lid on you also get a clockwise rotation of the media, which cleans better. One of the lids is vented, so you can see what is going on inside.
Also, the lid adds some rigidity to the bowl.
Hunting American dentists since 2015.