02-25-2017, 09:34 AM
OK I'm doing some metal, a bracket that bolts to the side of a front loader bucket. It will mount a hydraulic driven chainsaw, the mount supplied is the old one size fits all type ....not so great.
Certainly not a do-all, I call it a do-some, have it for 10 years, with a few mods it cuts clean and accurate. Next change i'm making will upgrade with a Lenox blade.
^^^^^
Cutting, RH or lower blade guide runs into the side of the material.
Cutting temporary stopped, on the fly mod made seen below, parts done.
V V
Small locator holes drilled, using edge finder makes that easy.
More holes, 3 two thur and one for a blind nut and bolt
Too the welding table, first assembly and welding
more later
Greg
Certainly not a do-all, I call it a do-some, have it for 10 years, with a few mods it cuts clean and accurate. Next change i'm making will upgrade with a Lenox blade.
^^^^^
Cutting, RH or lower blade guide runs into the side of the material.
Cutting temporary stopped, on the fly mod made seen below, parts done.
V V
Small locator holes drilled, using edge finder makes that easy.
More holes, 3 two thur and one for a blind nut and bolt
Too the welding table, first assembly and welding
more later
Greg
Magazines have issues, everything else has problems