03-31-2017, 09:32 PM
Thought I'd try being a cooper. Didn't bend the staves but sawed the inside and outside curves after cutting the angles on the sides.
The jig I used on the bandsaw to cut a 48 inch radius.
Now need to make the bands. Thought maybe make them out of metal banding but silver solder the joint rather than using the regular clips.
The jig I used on the bandsaw to cut a 48 inch radius.
Now need to make the bands. Thought maybe make them out of metal banding but silver solder the joint rather than using the regular clips.
Free advice is worth exactly what you payed for it.
Greg
Greg