04-12-2017, 11:55 AM
A good way to indicate vices in line with each other is to clamp a piece of 1" or larger TGP in both vises then indicate.
Many times a sq piece of CRS will suffice, just draw file the bumps, etc off the surface against the solid jaws.
BTW, for the operation you're performing the vises do not need to be aligned or even indicated straight with the axis.
Many times a sq piece of CRS will suffice, just draw file the bumps, etc off the surface against the solid jaws.
BTW, for the operation you're performing the vises do not need to be aligned or even indicated straight with the axis.