04-14-2019, 11:00 PM
Been pretty quiet here.
Finished this tonight, took a couple of evenings, my soldering was a little rusty, but the 1500 watt Weller soldering gun pulled through.
Now to build a case.
Hoping spring is someday going to come. I water the garden out of the pond, small debris plagues the sprinklers so I built a filter. Milled slots in the inner 1 1/2 abs tube and wrapped with this super fine brass screen I have, was surprised how well it soldered with a bit of soldering paste. Inlet water will come into the T and exit through the screen at the end port. Comes apart for easy flushing.
Finished this tonight, took a couple of evenings, my soldering was a little rusty, but the 1500 watt Weller soldering gun pulled through.
Now to build a case.
Hoping spring is someday going to come. I water the garden out of the pond, small debris plagues the sprinklers so I built a filter. Milled slots in the inner 1 1/2 abs tube and wrapped with this super fine brass screen I have, was surprised how well it soldered with a bit of soldering paste. Inlet water will come into the T and exit through the screen at the end port. Comes apart for easy flushing.
Free advice is worth exactly what you payed for it.
Greg
Greg