05-09-2023, 06:38 PM
I worked on getting my DRO working, or should I say not working. It wouldn't shut off. I assumed the switch was switching a relay to connect the 120VAC into the DRO and the relay went bad. Not so, the switch directly switches the 120V. The switch tested good with a continuity test so was a bit puzzling. The switch has a connector plugged into it instead of soldering the wires directly to the terminals. It appeared to also be good. I ended up buying a new switch from Digi-Key and got rid of the connector and soldered the wires directly to the switch terminals. I also cleaned up some of the other wiring. Up and running now.
Ed
Ed