I think I'm calling these done. Sprayed the rolling surfaces and ball bearings with a dry TFE lubricant so grease wont attract dirt.
The left side one has extra holes cause when I got them, they were both rights so I had to redrill to make it a left. now that I see them done, I think I need to drill extra holes in the right or I'll go crazy.
You can see why I wanted to blacken the aluminum bits. IDK, maybe the contrast is OK...suppose it will have to be
Before
The left side one has extra holes cause when I got them, they were both rights so I had to redrill to make it a left. now that I see them done, I think I need to drill extra holes in the right or I'll go crazy.
You can see why I wanted to blacken the aluminum bits. IDK, maybe the contrast is OK...suppose it will have to be
Before
Retired old guy finally living the dream and enjoying life to the fullest!!!