08-26-2012, 10:42 AM
Hello, I'm certainly no expert on this topic, but from experience, using stainless wire when electroplating can seriously slow the process, due I was told to the high resistance of the material, It was further stated that the boundary between electrolytes and stainless steel is particularly resistant to current flow.
So if you are using s/s TIG wire .....
Warning; This may be hokum. I have no evidence, this post is based on heresay and a couple of failed efforts plating some steel.
Best regards
Rick
So if you are using s/s TIG wire .....
Warning; This may be hokum. I have no evidence, this post is based on heresay and a couple of failed efforts plating some steel.
Best regards
Rick
Whatever it is, do it today, Tomorrow may not be an option and regret outlasts fatigue.