F350 that would be nice however I used to have a towing company in Calgary, moving forklifts was one of our jobs, I unfortunately hauled many broken or bent forks to the scrap yard, go figure now I could use one.
ED I envy you having the time-energy-willpower to get what you do done + do the drawings and look after the forum, when I get home from my weeks work I usually have some work to do on the truck and no energy to spare. Last week on my days off I installed new injectors in the engine and did a topset as well as rebuild the jake heads. Gained about 150 HP on the truck plus about 1.5 mpg fuel economy. But all that climbing up and down is hard on an old man.
tom
ED I envy you having the time-energy-willpower to get what you do done + do the drawings and look after the forum, when I get home from my weeks work I usually have some work to do on the truck and no energy to spare. Last week on my days off I installed new injectors in the engine and did a topset as well as rebuild the jake heads. Gained about 150 HP on the truck plus about 1.5 mpg fuel economy. But all that climbing up and down is hard on an old man.
tom
Logan 10x26" lathe
SIEG 12x40" lathe
RongFU 45 clone mill
6" import band saw
Baldor Grinder
thousand of tools+tooling pieces 40 yrs of collecting
SIEG 12x40" lathe
RongFU 45 clone mill
6" import band saw
Baldor Grinder
thousand of tools+tooling pieces 40 yrs of collecting