11-05-2015, 05:59 PM
I've made alot of machinable wax over the past few years. The plastic bags are the way to go. No need to cut or tear them up, they melt and mix in real quick.
TIP: Watch the heat! Get it too hot and it WILL flash (I won't say exactly how I know but it involved 3rd degree burns). That electric burner won't cool very fast. If possible, do it outside and if it flashes, just unplug the burner and walk away. Make sure the flames don't spread, if they do use the garden hose or call the FD if it's that bad. But stay away from the pot of wax!
TIP: Watch the heat! Get it too hot and it WILL flash (I won't say exactly how I know but it involved 3rd degree burns). That electric burner won't cool very fast. If possible, do it outside and if it flashes, just unplug the burner and walk away. Make sure the flames don't spread, if they do use the garden hose or call the FD if it's that bad. But stay away from the pot of wax!
Logan 200, Index 40H Mill, Boyer-Shultz 612 Surface Grinder, HF 4x6 Bandsaw, a shear with no name, ...
the nobucks boutique etsy shop | the nobucks boutique
the nobucks boutique etsy shop | the nobucks boutique