07-01-2017, 10:12 AM
Hawkeye: It's the TronXY with the 2017 updates. This one: http://www.ebay.com/itm/2017-Upgraded-Qu...2749.l2649 The box says P802, somewhere in the docs it says P802-S and also in the docs is says X6D.
Ed: Yep, that's the stuff. I started making a mold yesterday but ran outta mold making stuff. More on order, so I'll finish that next week. The guy that made the STL files slightly modified it so all the connectors for this printer will go thru it. As far as taking up room, that's something there is room for.
Doc: If you checked out the above link you already know it was $153.98. The max print size is 220 * 220 * 180mm. Layer thickness is between 0.1 and 0.4mm. I don't recommend the 0.1mm settings, I started a job yesterday around 2pm. It's only a box for holding 3x3 note cards (sticky notes). Here we are, 22+ hours later and it's STILL NOT DONE!!!
Consumables can be had pretty cheap, typical price is about $16/kg spool for PLA. ABS is a bit cheaper. That lot of 18 500g spools of ABS came out to about $3.50/spool. Not sure about the speed/hr. The only number they give is 40-120mm/sec.
Ed: Yep, that's the stuff. I started making a mold yesterday but ran outta mold making stuff. More on order, so I'll finish that next week. The guy that made the STL files slightly modified it so all the connectors for this printer will go thru it. As far as taking up room, that's something there is room for.
Doc: If you checked out the above link you already know it was $153.98. The max print size is 220 * 220 * 180mm. Layer thickness is between 0.1 and 0.4mm. I don't recommend the 0.1mm settings, I started a job yesterday around 2pm. It's only a box for holding 3x3 note cards (sticky notes). Here we are, 22+ hours later and it's STILL NOT DONE!!!
Consumables can be had pretty cheap, typical price is about $16/kg spool for PLA. ABS is a bit cheaper. That lot of 18 500g spools of ABS came out to about $3.50/spool. Not sure about the speed/hr. The only number they give is 40-120mm/sec.
Logan 200, Index 40H Mill, Boyer-Shultz 612 Surface Grinder, HF 4x6 Bandsaw, a shear with no name, ...
the nobucks boutique etsy shop | the nobucks boutique
the nobucks boutique etsy shop | the nobucks boutique