Power Crossfeed for Asian 9X20s
#61
Hi my name is Bill and I'm a machine-a-holic. RotflRotfl

"Billy G"
Reply
Thanks given by:
#62
War Dept. is on my case. No sense of humor today. I have to call it a day. Before and after on the #1 pulley. Pic #2 is mounted in place.

"Billy G"


Attached Files Thumbnail(s)
       
Reply
Thanks given by:
#63
We are here. Both pulleys modified and in place.

"Billy G"


Attached Files Thumbnail(s)
   
Reply
Thanks given by:
#64
The black knob is the friction override that will allow the drive to slip if there is too much drag..

"Billy G"


Attached Files Thumbnail(s)
   
Reply
Thanks given by:
#65
That ought to do the trick. Looks like it's almost time for the spark test.

Tom
[Image: TomsTechLogo-Profile.png]
Reply
Thanks given by:
#66
I need to put the drive pin in and get a 22 inch 40 tooth X 2.5mm pitch belt and it's a done deal Tom. Abel Trans. tomorrow should have one.

"Billy G"
Reply
Thanks given by:
#67
1/16 endmill at 1650 really makes your day in a manual mill. The it the engagement pin slot. All I need not is the belt. It will be here Saturday. I tried it with a vacuum cleaner anr it works OK. A little slip was evident but I think that was just the type of belt.

"Billy G"


Attached Files Thumbnail(s)
   
Reply
Thanks given by:
#68
I'm all done. Abel Transmission found two belts at their warehouse. This thing is smooooooth running. Thank you Tom for your help and thanks to all for watching.

"Billy G"


Attached Files Thumbnail(s)
   
Reply
Thanks given by:
#69
Nice job Bill and thanks for sharing it with us. How about a video demo?

Tom
[Image: TomsTechLogo-Profile.png]
Reply
Thanks given by:
#70
I don't know how to do a video or I would Tom. Maybe my son knows how, I will check.

"Billy G"
Reply
Thanks given by:




Users browsing this thread: 1 Guest(s)