Posts: 438
Threads: 67
Joined: Sep 2012
Location: Central Mass.
01-17-2014, 07:22 PM
Have a repeat job we do a few times a year and it just came up again so thought I'd give it a go in the new machine.
Using my Walter 2.00 face mill with Walter aluminum specific inserts we profiled .270" deep, and at one point in the cut it is taking a 1.75" width of cut.
9,550 RPM and 200 IPM giving me 5,000 SFM.
I just love this cutter!!
Enjoy the video!
Posts: 2,344
Threads: 53
Joined: Feb 2012
Location: Spencer MA USA
Wow, nice!
I know you were topping out at 7500 rpm and 40 inches per minute on the older Haas VF0, so that's quite a leap with the new VF2SS. Nice having the 3-phase power on that machine now too. I couldn't help but notice the spindle motor load was just shy of 100% load at the widest part of the toolpath, so you know there's more available when you need it. The motors are rated for 50% more load in short bursts like that.
The cutter is a Walter F4041.UB.051.Z04.13, and I believe Ed has one of those as well. I've never heard any reports from him about the cutter though.
Posts: 175
Threads: 4
Joined: Sep 2012
Location: Dorset, UK
Nice video, thanks for posting!
Arbalest, proud to be a member of MetalworkingFun since Sep 2012.
Posts: 716
Threads: 32
Joined: Apr 2012
Location: Washington, USA
01-18-2014, 10:00 AM
(This post was last modified: 01-18-2014, 10:00 AM by Sunset Machine.)
Nice!
Can I borrow it?
Posts: 4,513
Threads: 139
Joined: Feb 2012
Location: Kempton Park. South Africa
Quick eh!
Thanks for showing
DaveH
Posts: 8,742
Threads: 313
Joined: Feb 2012
Location: Arizona/Minnesota
The following 1 user Likes EdK's post:
wrustle (01-18-2014)
(01-17-2014, 09:21 PM)PixMan Wrote: ...
The cutter is a Walter F4041.UB.051.Z04.13, and I believe Ed has one of those as well. I've never heard any reports from him about the cutter though.
Ken,
I was going to use it for the first time on a project about 4 weeks ago. I had to build some guards to mount on the mill table to prevent the swarf from shooting all over the shop. I got those done and was all set up to start milling the project when I had to tear it down to do some machining on a project for my real job. Life has since gotten in the way and I haven't stepped foot in the shop for weeks now. When I do get back to the project, I plan on doing a video of the cutter in use.
Ed
Posts: 1,459
Threads: 159
Joined: Feb 2012
Location: Northern England
Nice
Makes good music
John
Posts: 4,683
Threads: 93
Joined: Feb 2012
Location: Perth, Australia
I've only just watched this, as I've had some internet issues. That is one nice machine Russ. I love the tool changer!
Hunting American dentists since 2015.
