Stuck Revolving Centre in Tailstock Spindle

Pages (4): « Previous 1 2 3 4 Next »

Thread Modes

Stuck Revolving Centre in Tailstock Spindle

dallen Offline

Senior

Posts: 1,827
Threads: 51
Joined: Apr 2012
Location: Oklahoma

#11

05-27-2014, 07:31 AM

Make a set of tapered wedges that are thick enough to drive in between the spindle and the center and wedge the center out. you should be able to do it with just one wedge.

DA

dallen, proud to be a member of MetalworkingFun Forum since Apr 2012.

If life seems normal, your not going fast enough! Tongue

Like Post

Thanks given by: Wongster

Mayhem Offline

purveyor of mischief

Posts: 4,683
Threads: 93
Joined: Feb 2012
Location: Perth, Australia

#12

05-27-2014, 09:23 AM

If you know a mechanic, he should have a ball joint separator, which he may be willing to let you borrow. Or he may do it for you.

Hunting American dentists since 2015.

Like Post

Wongster Offline

Junior

Posts: 301
Threads: 30
Joined: Mar 2012
Location: Singapore

#13

06-12-2014, 07:59 PM

Hi guys,

Been so busy to do anything in the shop. Hope this Saturday can work out something.

Will post update.

Thank you all for your help and suggestions.

Wong

Wongster
http://www.wongstersproduction.com

Proud to be a member of MetalworkingFun Forum since Mar 2012.

Like Post

kenne

Sophmore

Posts: 97
Threads: 5
Joined: Jun 2014
Location: las vegas burbs

#14

06-12-2014, 10:26 PM

You might try a ball joint tool for auto's , depends on the size you need , you can rent them at places like autozone ,etc . Hope this helps !

kenne, proud to be a member of MetalworkingFun Forum since Jun 2014.

Like Post

Thanks given by: Wongster

TomG Offline

Alt. Whipping Boy

Posts: 3,795
Threads: 183
Joined: Jun 2012
Location: Farmington Hills, Michigan

#15

06-13-2014, 11:17 AM

Yes, the wedge (ball joint tool) is a good idea. You should be able to make one to fit perfectly without too much trouble. That's how drill chucks are removed from their arbors.

Tom

Like Post

Thanks given by: Wongster

ieezitin Offline

Sophmore

Posts: 205
Threads: 27
Joined: Jan 2013
Location: Maryland USA

#16

06-13-2014, 06:34 PM

If you can get hold of it try Kroil. ™

soak it and whack it with the wedge action as described. if it went in its gonna come out.

ieezitin, proud to be a member of MetalworkingFun Forum since Jan 2013.

Like Post

Thanks given by: Wongster

Wongster Offline

Junior

Posts: 301
Threads: 30
Joined: Mar 2012
Location: Singapore

#17

06-14-2014, 12:26 AM

I'm trying to make the 2 pc wedge tool posted on Madmodder. Just realized that I do not have any steel plates around. Would aluminium do? I'll try to make it with the aluminium plates I've around for practice. Been off machining for a while.

On the slope surface, any advice on how i can machine it?

Wong

Wongster
http://www.wongstersproduction.com

Proud to be a member of MetalworkingFun Forum since Mar 2012.

Like Post

Mayhem Offline

purveyor of mischief

Posts: 4,683
Threads: 93
Joined: Feb 2012
Location: Perth, Australia

#18

06-14-2014, 07:44 AM

I would think that aluminium might be too soft but if you have some scrap around it is worth a try. Place it in your vise so the angle runs parallel to the top of the vise. The angle has to be close enough, not spot on.

Hunting American dentists since 2015.

Like Post

Wongster Offline

Junior

Posts: 301
Threads: 30
Joined: Mar 2012
Location: Singapore

#19

06-14-2014, 08:23 AM

Hello guys,

Good news for me! The aluminium wedge works!!! I only made the 2 pcs of wedge, put the stuck spindle/live centre in the slot and hammer away with a mallet. Not too much force required to break the grip.

Hahaha... I'm a happy man. Saved SGD200 over dollars of replacement cost!

HopefulDave, can i have your permission to post your drawings on my blog? Though my "tool" is just part of what you drawn out, I want to document the wedge. Please....

Thank you all you guys!!!

Wong