Project Clamp Knurling Tool
A really nice job Ed. Thumbsup 
Smiley-eatdrink004 
DaveH
 a child of the 60's and 50's and a bit of the 40's Smile
Reply
Thanks given by: EdK
(01-15-2017, 11:00 AM)TomG Wrote: The pitch I use most is 20tpi, but I also have 25 tpi for a bit coarser pattern. I also have some 35tpi straight knurls which I use a lot.

Tom

Tom,

I would have thought that the more tpi the "FINER" the knurl produced?  17428

Ed,
Nice job! Thumbsup
Busy Bee 12-36 lathe, Busy Bee Mill drill, Busy Bee 4x6 bandsaw, Homemade 9x17 bandsaw, Ad infinitum.
Reply
Thanks given by: EdK
I'm sure you are well aware of that brain fart thing, Steve. Big Grin

Tom
[Image: TomsTechLogo-Profile.png]
Reply
Thanks given by:
Know what you mean...


Attached Files Thumbnail(s)
   
Mike

SB 10K (1976) Rockwell vertical mill (1967) Rockwell 17" drill press (1946) Me (1949)
Reply
Thanks given by:
I forgot to mention that Tom would be proud of me. I power tapped the threaded holes in the body. Big Grin

Ed
Reply
Thanks given by:
Are your nerves still intact? Big Grin

Tom
[Image: TomsTechLogo-Profile.png]
Reply
Thanks given by:
Nice looking tool!!!

A knurling tool will be my next project, after the sheet metal brake which I just modeled in 3D to give me a feel of how each part looks like. The knurling tool will be based off a plan I bought from Hemingway Kits, not a cheap way to get suitable metals but its not easy to get some metal here in SG given the small quantity.
Wongster
http://www.wongstersproduction.com

Proud to be a member of MetalworkingFun Forum since Mar 2012.
Reply
Thanks given by: EdK
I was really hoping to get back to the metalwork. November and December were so slow for the cabinetmaking trade that I thought it might be a good time to retire. All of the sudden, I've got jobs out into April.

Not that I'm complaining, you understand...
Mike

SB 10K (1976) Rockwell vertical mill (1967) Rockwell 17" drill press (1946) Me (1949)
Reply
Thanks given by:




Users browsing this thread: 1 Guest(s)