Belt Sander 2000x50 / 72"x2"
#11
Hi Al 


Quote:You can always cast extra wheels, if the double-loop puts too much wear on the contact wheels.


All I will need to do is turn the worn out rubber off the wheel , re mount wheel in mould , fill mould with rubber , jobs a good one  Big Grin  , I work in an industry that uses Urethane wheels /tyres  a lot on concrete and they are very robust lasting years . 

And to get a true profile ( 180 degrees ) for a tube notch  of say a 1 inch tube the belt does need some assistance .  Then there is the time it takes to cut the notch , say 30s to 60s  not long , so I reckon I will get a fair few notches out of a set of guide wheels . 


Quote: bought all the bits & pieces (almost said "bits & Bobs, but don't want to offend any Roberts), and have the main frame built.


Rotfl Rotfl  not offencive in the least  Big Grin


Surface grinding attachment ,,,,,,,,,,,,,,,,,, interesting  Chin

Quote:Keep us posted on the urethane casting. I'd be extremely interested in knowing more about that.


Will do  Smile


Rob
Reply
Thanks given by:
#12
Rob - this is where the smart-arse in me points out that you could have cast aluminium wheels (for those of you in the US - the second "i" only appears if it is cast correctly) if you hadn't sold your furnace Big Grin
Hunting American dentists since 2015.
Reply
Thanks given by:
#13
Hi Darren  Rotfl

This is where the smart -arse   in me flips you the bird Big Grin  , 

The thing is mate there are only two wheels the same size ,so I would need a pattern for each probably 8 different sizes in total   ,I only need one set , so it would be quicker to just turn them from sold and miss out the pattern making and casting , yes if I did not have bar stock or were to need say 5 of each ,then fair dinkum .  



Cheers Rob
Reply
Thanks given by:
#14
(01-23-2016, 03:43 AM)RobWilson. Wrote: Surface grinding attachment ,,,,,,,,,,,,,,,,,, interesting  Chin

Yeah, doubly so since I don't have a surface grinder. :)
Reply
Thanks given by:




Users browsing this thread: 1 Guest(s)