2" x 48" belts
#1
I have the chance to buy at a very reasonable price a 2 x 48" belt grinder. Having done some research it appears that this size of belt is not readily available here in sunny Canada. Can anybody recommend a good supplier in the USA as I can get them shipped to a US postal address.

Thanks
John
Reply
Thanks given by:
#2
Amazon has a bunch as does this place.

https://trugrit.com/index.php?main_page=...d67e000fba

Ed
Reply
Thanks given by:
#3
A general search using the size will give you plenty of choices.. think you should not have very much trouble finding sources.

What the hell is with Canada it's not an island, that makes ya'll have such problems buying stuff? Need to drive over to the falls, cross the boarder, rent a PO box state side.... Big Grin  

Greg
Magazines have issues, everything else has problems

Reply
Thanks given by:
#4
Huge country, small population so not economically attractive to many companies. Most of us have US postal addresses for that very reason and we just gave to hope the boarder guys are feeling generous every time we cross, is not much fun!


Has anybody tried cutting a 6 x 48 belt and extracting a 2 x 48 belt from it? 

The thinking behind this is that the 6" belts are the same price as the 2" belts so im thinking I can get 3 belts for the price of one. Are they too time consuming and difficult to cut or am I being too tight?

John
Reply
Thanks given by:
#5
They cut easy John its worth going that rout...its a sound reason if any plus it cuts down that Iditarod postal service up there.


Anthony.
ieezitin, proud to be a member of MetalworkingFun Forum since Jan 2013.
Reply
Thanks given by:
#6
(01-03-2017, 12:36 PM)Old Minger Wrote: Huge country, small population so not economically attractive to many companies. Most of us have US postal addresses for that very reason and we just gave to hope the boarder guys are feeling generous every time we cross, is not much fun!


Has anybody tried cutting a 6 x 48 belt and extracting a 2 x 48 belt from it? 

The thinking behind this is that the 6" belts are the same price as the 2" belts so im thinking I can get 3 belts for the price of one. Are they too time consuming and difficult to cut or am I being too tight?

John

(01-03-2017, 05:17 PM)ieezitin Wrote: They cut easy John its worth going that rout...its a sound reason if any plus it cuts down that Iditarod postal service up there.


Anthony.

Thanks Anthony Thumbsup
Reply
Thanks given by:
#7
(01-03-2017, 05:17 PM)ieezitin Wrote: They cut easy John its worth going that rout...its a sound reason if any plus it cuts down that Iditarod postal service up there.


Anthony.

[img]webkit-fake-url://5ad0d36b-2662-4374-8b8a-ce0087109304/imagejpeg[/img]
Mike

SB 10K (1976) Rockwell vertical mill (1967) Rockwell 17" drill press (1946) Me (1949)
Reply
Thanks given by:
#8
Mike couldn't 'see' that picture you posted, what was it of?

Cheers
John
Reply
Thanks given by:
#9
Sorry. I thought I could post it from my iPad.


Attached Files Thumbnail(s)
   
Mike

SB 10K (1976) Rockwell vertical mill (1967) Rockwell 17" drill press (1946) Me (1949)
Reply
Thanks given by:
#10
John

if you get that belt grinder that will make a smashing HSS tool grinding tool as well. 

I picked up on your other thread about lack of tooling... a very simple made jig for the belt grinder will grind up your tooling looking like it just got finished on a surface grinder. 

Google and Youtube belt sanders and research what people have made and what they do with them pay attention to some designs that allows you to change the grinding position to make them more flexible. 

Im gathering materials right now for which is in essence a miniature belt grinder made with a 4'' Metabo angle grinder its going to be a Linisher for a Flat bed truck im building.. Belt sanders are the Tits..

Anthony.
ieezitin, proud to be a member of MetalworkingFun Forum since Jan 2013.
Reply
Thanks given by:




Users browsing this thread: 1 Guest(s)