Posts: 8,741
Threads: 313
Joined: Feb 2012
Location: Arizona/Minnesota
And here's the stl file for the box lid.
I had to compress it because it's a 2.4M file. The limit set for stl files was 2M so I changed it to 3M but it still wouldn't allow it to be attached.
Ed
threadboxlid.stl.zip (Size: 609.01 KB / Downloads: 1)
Posts: 686
Threads: 42
Joined: Mar 2012
Location: Rochester, NY
The following 4 users Like rleete's post:
JScott (02-22-2023), Vinny (02-22-2023), EdK (02-22-2023), arvidj (02-22-2023)
I bought a Harbor Freight magnetic indicator stand last night. For less than 12 bucks, I'm satisfied. Magnet turns on and off smoothly, ground surfaces are flat and even, and it holds an indicator.
I probably won't use it much, but I had to know what the runout on my lathe is before machining the 5C adapter plate, so why not get one. I was pleasantly surprised to find it was under .0003" on the spindle, and the rough adapter plate was still within .0006". I believe the discrepancy is mostly in the roughness of the surface.
Full of ideas, but slow to produce parts
Posts: 8,741
Threads: 313
Joined: Feb 2012
Location: Arizona/Minnesota
When checking the squareness of stock I had milled on the mill I kept getting out of squareness using the squares I had. I had bought them years ago for woodworking, long before I got involved in metalworking. It finally dawned on me that maybe the stock is square and the squares are not. Sure enough testing them against a 1-2-3 block proved that they were not very accurate. More than good enough for woodworking but not so for metalworking. So I bought this set which arrived yesterday.
Ed
Posts: 8,741
Threads: 313
Joined: Feb 2012
Location: Arizona/Minnesota
I finally found a spacer block set that was reasonably priced. I use to have one and used it all of the time. Perfect for when gauge blocks are overkill, which for me is 99.5% of the time. They sure have gone up in price since I bought the last set.
Ed
Website picture.
My picture.
Posts: 686
Threads: 42
Joined: Mar 2012
Location: Rochester, NY
After looking these up online, I have only one thing to say:
Full of ideas, but slow to produce parts
Posts: 8,741
Threads: 313
Joined: Feb 2012
Location: Arizona/Minnesota
(08-11-2023, 11:29 AM)rleete Wrote: After looking these up online, I have only one thing to say:
Yea, they aren't cheap. I think I paid $35 for the first set I had. This one costs $57.21.
Ed
Posts: 686
Threads: 42
Joined: Mar 2012
Location: Rochester, NY
The following 1 user Likes rleete's post:
EdK (08-12-2023)
I cheaped out and bought a set made for woodworking. Only has 1/16" to 2", by 1/16ths up to 1". Parts are red anodized aluminum, but it should work for me.
Full of ideas, but slow to produce parts