Best Yet Knurling Tool
#51
Nice job Dallen! Make sure that little baby is legal before posting pics of it. I'm sure the BATF has people on these sights all day long looking to justify their existence.

Here is a little drawing of my knurling tool body. It should be enough to get you started making patterns.

Knurling Tool Body

Tom
[Image: TomsTechLogo-Profile.png]
Reply
Thanks given by:
#52
I think I'd rather eat your mama's biscuits but that's a nice looking handgun for being made of stuff from the scrap box. What caliper is it? Is it for show or do you plan on shooting it?

Ed
Reply
Thanks given by:
#53
Tom thanks for the Drawing, will post some pictures in a day or two.


I made this as practice on making small parts, I lack a lot in the in the making of small parts and bits stuff like the hammer and trigger and getting the hammer spring to work (which is made from a sliver that I cut our of a Spring Rake Tine). Anyway I have started an 1885 Winchester Highwall Rifle in 45/70 or I should say I have started the receiver, and there's a lot of little parts in it so I did this sorta as extra homework for making little stuff like the barrel latch, the firing pin, and the safety which isn't in this photo, Yea I know the parts look a little big and clumsy. I did go from three parts on the barrel latch that were silver soldered together to two because I re done the lever so the pad is made on the lever.

I will shot it just to prove that it works then its onto the shelf while I make a knurler or something else. who knows maybe an improved version. oooh yea its caliber is 9 MM cause thats what the barrel stub was.

DA
dallen, proud to be a member of MetalworkingFun Forum since Apr 2012.

If life seems normal, your not going fast enough! Tongue
Reply
Thanks given by:
#54
Tom you have any measurements for the frame on the back side of that knurler
dallen, proud to be a member of MetalworkingFun Forum since Apr 2012.

If life seems normal, your not going fast enough! Tongue
Reply
Thanks given by:
#55
(12-14-2012, 03:12 PM)dallen Wrote: Tom you have any measurements for the frame on the back side of that knurler

You're going to make me draw up the whole thing aren't you? Whip

I am in the shop, but am actually working right now, so I'll take a look at it later this evening.

Tom
[Image: TomsTechLogo-Profile.png]
Reply
Thanks given by:
#56
laters find I really just need to know how big a square the pads are that bolt to the frame I'll take it from there no sense is totally re engineering the wheelBig GrinBig Grin. thanks for the PDF

DA
dallen, proud to be a member of MetalworkingFun Forum since Apr 2012.

If life seems normal, your not going fast enough! Tongue
Reply
Thanks given by:
#57
These are some of the best knurling tools you can get. They don't press form the knurling but cut it into the stock.
Expensive though ...

http://www.zeus-tooling.de/en/products/c...tools.html

This is my simple clamp type one though:

[Image: IMGP1675.jpg]
Arbalest, proud to be a member of MetalworkingFun since Sep 2012.
Reply
Thanks given by:
#58
got a little done this morning, now to find another hunk of 1.250 X 1.250 aluminum so I can do the other side.

[Image: knurler001_zps956db072.jpg]
dallen, proud to be a member of MetalworkingFun Forum since Apr 2012.

If life seems normal, your not going fast enough! Tongue
Reply
Thanks given by:
#59
(12-15-2012, 04:29 AM)Arbalest Wrote: This is my simple clamp type one though:
Thats really nice. I kept a pic of your past picture for reference to make my own & forgot where it came from to begin with.

- do you have drawings?
- can you elaborate on the axles for the knurling wheels
- do you use a socket wrench on that hex part to bear down the knurls on the workpiece?
- Im also interested in how you managed the fit between the arms & plate. Ive heard that that is one of the ingrdients of good knurls - minimal side play or flex.
... so you are happy with how it works?
petertha, proud to be a member of MetalworkingFun since Sep 2012.
Reply
Thanks given by:
#60
Tom thanks again for the information on making this.

except for some knurls I plan on using the readily available single rollers ones that have 1/2" shanks on then. I finished itBig GrinBig Grin but still need to pick up 4 screws for the adjusters

now its time for 5176Popcorn

[Image: knurler002_zpsf02f5d3f.jpg]

DA
dallen, proud to be a member of MetalworkingFun Forum since Apr 2012.

If life seems normal, your not going fast enough! Tongue
Reply
Thanks given by:




Users browsing this thread: 2 Guest(s)