07-08-2015, 06:47 PM
We believed you did it Ed, really we did.
Free advice is worth exactly what you payed for it.
Greg
Greg
|
Todays Project - What did you do today?
|
|
07-08-2015, 08:11 PM
worked on a little project
dallen, proud to be a member of MetalworkingFun Forum since Apr 2012.
If life seems normal, your not going fast enough! 
07-08-2015, 08:50 PM
much better Ed
Logan 200, Index 40H Mill, Boyer-Shultz 612 Surface Grinder, HF 4x6 Bandsaw, a shear with no name, ...
the nobucks boutique etsy shop | the nobucks boutique 
07-09-2015, 07:35 PM
 (07-09-2015, 07:35 PM)PixMan Wrote:(07-08-2015, 08:11 PM)dallen Wrote: worked on a little project I didn't like the steel one, or the first one that I made out of brass, I'm thinking that I need to find someone that can cut a couple scrolls on the ends to fancy this one up a bit. The cutter I made did a bang up job of cutting the end so that they fit like a glove on the pin heads. It also looks a lot better after I polished it up a bit, now if the correct screw would just get here so I can take that big ugly one out I'll be happy DA
dallen, proud to be a member of MetalworkingFun Forum since Apr 2012.
If life seems normal, your not going fast enough!
07-13-2015, 10:57 PM
made some screws, the two black ones I bought and found out that after spending 9 dollars they were the wrong pitch so I made two to replace then. 12 X 28 pitch screws I turned out the blanks then cheated and used a die to cut the thread. they are only a .375" long
dallen, proud to be a member of MetalworkingFun Forum since Apr 2012.
If life seems normal, your not going fast enough!
07-14-2015, 10:36 AM
The finest feed on my planer was something like .015 and quite the chipload. I cured it with a piece of scrap and some hose clamps (top right in the b&w pic) and now working very well. Chipload is now at .008 and DOC is .125 and producing a decent finish on a piece of flame cut steel scrap.
07-14-2015, 11:37 AM
Collet wrack is a done deal.... Had to pick up finish w/out kiddo. Few finial touches and she's getting hung. Hate not finishing a job...lol...... My 30 yr old rivet gun crapped out so I gota get one to put rivets on the top.
Still not sure if im gona add the bottom sides or not cuz im hanging the wrack up next to the mill. This design was supposed to be for both bench top and hang. Was gona simply buy one but said Naa!1 what fun is that ? . Than wanted to build a rotary style wrack . But the whole purpose I designed this one was to do simple project my son . I decided on a flip top to kill 2 birds again keep the chips out of collects while EZ access from the helm. Well thats a wrap. Other than that maybe a small hand polish but no more . Need to start building my base stand for when my New mill arrives. Ok gota get off to my day Job lol.... funny how times flies when your havin fun. 
07-14-2015, 07:11 PM
Really like the rack Kenny, nice work. I reckon I would put a bottom and sides on it, nice as it is to be able to see the shiny collets hanging there, I know in my shed they would be coated with dust in no time at all.
Lathe (n); a machine tool used in the production of milling machine components.
Milling Machine (n); a machine tool used in the production of lathe components. |
|
« Next Oldest | Next Newest »
|
Users browsing this thread: 19 Guest(s)