Posts: 3,002
Threads: 51
Joined: Apr 2012
Location: Ontario
Don't remember the numbers off the top of my head but did a quick calculation when I was building it and thought I needed the reduction, hope I was right.
Had made the axle for an 8 foot width, then realized the openings into the shed where it will be stored are only 7 foot 9. Had to cut 6 inches out of the middle of it, Dah.
Free advice is worth exactly what you payed for it.
Greg
Posts: 2,596
Threads: 99
Joined: Dec 2014
Location: Michigan
The following 1 user Likes Vinny's post:
Mayhem (01-25-2016)
I would've thought you'd enlarge the opening!
Posts: 121
Threads: 4
Joined: Dec 2014
Location: Germany/Kandern
(01-25-2016, 12:57 PM)f350ca Wrote: Don't remember the numbers off the top of my head but did a quick calculation when I was building it and thought I needed the reduction, hope I was right.
Had made the axle for an 8 foot width, then realized the openings into the shed where it will be stored are only 7 foot 9. Had to cut 6 inches out of the middle of it, Dah.
What, you don't have a chainsaw? Is the shed wood?
Posts: 340
Threads: 24
Joined: Aug 2014
Location: Seattle, WA
Many years ago, a friend's father-in-law told us a story about something he saw in the army, during WWII. Seems an officer's door was scraping on the wood floor, so they brought in somebody with a hatchet to lower the floor...
Mike
SB 10K (1976) Rockwell vertical mill (1967) Rockwell 17" drill press (1946) Me (1949)
Posts: 3,002
Threads: 51
Joined: Apr 2012
Location: Ontario
The following 1 user Likes f350ca's post:
EdK (01-26-2016)
The shed is pretty much fixed.
![[Image: IMG_0106.jpg]](https://lh3.googleusercontent.com/-0666VkM3Ryo/UCsFLO_enqI/AAAAAAAAAeQ/EUFamhtNli4/s1280-Ic42/IMG_0106.jpg)
I'd spotted the containers 24 feet apart, years before I got to the roof. Seamed like a good number till I realized the posts.
When I built the shop I framed the door opening upstairs for a double door. When the door came it was a 1/2 inch taller than a standard entrance door. It was easier to take 3/8 of an inch out of the floor sheating than cut the header.
Free advice is worth exactly what you payed for it.
Greg
Posts: 3,002
Threads: 51
Joined: Apr 2012
Location: Ontario
The following 4 users Like f350ca's post:
Mayhem (01-30-2016), EdK (01-30-2016), Vinny (01-30-2016), Highpower (01-31-2016)
01-30-2016, 07:29 PM
(This post was last modified: 01-30-2016, 07:30 PM by f350ca.)
Got the sub frame together today after a Lot of cutting and grinding on those side rails.
![[Image: IMG_2034.jpg]](https://lh3.googleusercontent.com/-WV8zMGtX8Ow/Vq1UNCCcwvI/AAAAAAAADkk/G2dWBSJRi5Q/s912-Ic42/IMG_2034.jpg)
The rails aren't as curved as the camera portray's them.
Free advice is worth exactly what you payed for it.
Greg
Posts: 3,002
Threads: 51
Joined: Apr 2012
Location: Ontario
The following 5 users Like f350ca's post:
Mayhem (02-02-2016), EdK (02-02-2016), PixMan (02-05-2016), TomG (02-05-2016), DaveH (02-05-2016)
It all looked good on paper but was sure glad to see it fit.
![[Image: IMG_2039.jpg]](https://lh3.googleusercontent.com/-YUvhRnIXuB0/VrAte-A5FpI/AAAAAAAADk0/qXG4wNY7KnI/s1280-Ic42/IMG_2039.jpg)
The simulated smoke flavoured log aka garbage can is 19 inches in dia, looks like it will cut a 24 inch log as planned.
Free advice is worth exactly what you payed for it.
Greg
Posts: 121
Threads: 4
Joined: Dec 2014
Location: Germany/Kandern
I am sitting here wringing my hands with a strange laugh. Just waiting for the first log to go through. I can taste it! Keep at it.
Posts: 2,344
Threads: 53
Joined: Feb 2012
Location: Spencer MA USA
(02-02-2016, 12:10 PM)Black Forest Wrote: I am sitting here wringing my hands with a strange laugh. Just waiting for the first log to go through. I can taste it! Keep at it.
I could envision you making a similar machine, though it might not be made for firewood processing. Rather, yours would be task engineered to lop off the heads of local government officials.
Posts: 340
Threads: 24
Joined: Aug 2014
Location: Seattle, WA
Mike
SB 10K (1976) Rockwell vertical mill (1967) Rockwell 17" drill press (1946) Me (1949)
