Fire Wood Processor
Don't remember the numbers off the top of my head but did a quick calculation when I was building it and thought I needed the reduction, hope I was right.
Had made the axle for an 8 foot width, then realized the openings into the shed where it will be stored are only 7 foot 9. Had to cut 6 inches out of the middle of it, Dah.
Free advice is worth exactly what you payed for it.
Greg
Reply
Thanks given by:
I would've thought you'd enlarge the opening!
Logan 200, Index 40H Mill, Boyer-Shultz 612 Surface Grinder, HF 4x6 Bandsaw, a shear with no name, ...
the nobucks boutique etsy shop  |  the nobucks boutique
Reply
Thanks given by:
(01-25-2016, 12:57 PM)f350ca Wrote: Don't remember the numbers off the top of my head but did a quick calculation when I was building it and thought I needed the reduction, hope I was right.
Had made the axle for an 8 foot width, then realized the openings into the shed where it will be stored are only 7 foot 9. Had to cut 6 inches out of the middle of it, Dah.

What, you don't have a chainsaw? Is the shed wood?
Reply
Thanks given by:
Many years ago, a friend's father-in-law told us a story about something he saw in the army, during WWII. Seems an officer's door was scraping on the wood floor, so they brought in somebody with a hatchet to lower the floor...
Mike

SB 10K (1976) Rockwell vertical mill (1967) Rockwell 17" drill press (1946) Me (1949)
Reply
Thanks given by:
The shed is pretty much fixed.
[Image: IMG_0106.jpg]
I'd spotted the containers 24 feet apart, years before I got to the roof. Seamed like a good number till I realized the posts.
When I built the shop I framed the door opening upstairs for a double door. When the door came it was a 1/2 inch taller than a standard entrance door. It was easier to take 3/8 of an inch out of the floor sheating than cut the header.
Free advice is worth exactly what you payed for it.
Greg
Reply
Thanks given by:
Got the sub frame together today after a Lot of cutting and grinding on those side rails.
[Image: IMG_2034.jpg]

The rails aren't as curved as the camera portray's them.
Free advice is worth exactly what you payed for it.
Greg
Reply
Thanks given by:
It all looked good on paper but was sure glad to see it fit.

[Image: IMG_2039.jpg]
 The simulated smoke flavoured log aka garbage can is 19 inches in dia, looks like it will cut a 24 inch log as planned.
Free advice is worth exactly what you payed for it.
Greg
Reply
Thanks given by:
I am sitting here wringing my hands with a strange laugh. Just waiting for the first log to go through. I can taste it! Keep at it.
Reply
Thanks given by: f350ca
(02-02-2016, 12:10 PM)Black Forest Wrote: I am sitting here wringing my hands with a strange laugh.  Just waiting for the first log to go through.  I can taste it!  Keep at it.


I could envision you making a similar machine, though it might not be made for firewood processing. Rather, yours would be task engineered to lop off the heads of local government officials.
Yikes
Reply
Thanks given by:
Dr. Guillotin would be proud!

https://en.m.wikipedia.org/wiki/Joseph-Ignace_Guillotin
Mike

SB 10K (1976) Rockwell vertical mill (1967) Rockwell 17" drill press (1946) Me (1949)
Reply
Thanks given by:




Users browsing this thread: 8 Guest(s)