03-03-2017, 05:30 AM
Vinny - your pics loaded and then were replaced by the placeholder.
Hunting American dentists since 2015.
|
Latest Delivery
|
03-03-2017, 06:07 AM
Today's delivery (delivered by me to myself) was a bunch of lathe toolholders and a table extension for the shaper. The toolholders are hiding somewhere inside these forks
and the shaper table extension is hiding somewhere inside this chunk of 1 1/4" plate that I spotted near the forks at the scrap metal yard There might even be a couple of angle brackets hiding in the forks also. Come to think of it there is probably a back injury tucked away somewhere in there too.
Lathe (n); a machine tool used in the production of milling machine components.
Milling Machine (n); a machine tool used in the production of lathe components.
03-03-2017, 06:41 AM
Nice haul. How thick are the tynes Pete?
Hunting American dentists since 2015.
03-03-2017, 11:46 AM
(03-03-2017, 05:30 AM)Mayhem Wrote: Vinny - your pics loaded and then were replaced by the placeholder. What placeholder? I only see the pics I linked to.
Logan 200, Index 40H Mill, Boyer-Shultz 612 Surface Grinder, HF 4x6 Bandsaw, a shear with no name, ...
the nobucks boutique etsy shop | the nobucks boutique 
03-03-2017, 05:08 PM
03-03-2017, 11:31 PM
(03-03-2017, 06:41 AM)Mayhem Wrote: Nice haul. How thick are the tynes Pete? The upright part of the tynes are 50x130mm.
Lathe (n); a machine tool used in the production of milling machine components.
Milling Machine (n); a machine tool used in the production of lathe components.
03-04-2017, 05:00 AM
Pictures are showing now, so whatever it was, it is sorted.
Hunting American dentists since 2015.
The UPS dude showed up yesterday.
![[Image: XEd0hBs.jpg]](http://i.imgur.com/XEd0hBs.jpg) I had a Taiwanese 4" Kurt clone and tried to find a mate to it, but came up empty. A friend needed modifications to his lathe tailstock so he could peck drill when making pens. I mentioned I wanted a mate to my vise but was having difficulty finding one about the same time as he decided to buy a mill. So we struck a deal on my vise and he ordered two 4" ones from Shars while he was submitting a fair sized order. He also received a 10% discount as it was his first Shars order. I already had the one swivel base sprayed down with LPS 3 and bagged up for storage. After I took the pic I did the same with the vise on the left. It would have been nice to find a couple of used Kurt 4" vises, but these should do just fine as I'm not making aerospace or nuclear power plant parts.
03-13-2017, 03:51 PM
gday , just bought this machine on the weekend and i would like to find an owners manual for it . hpe some one may have a pdf or something on the machine.
i have posted it in another metal work forum but no replies as yet , so i thought i would try here as there would be members here that are not members of the other forum , i have also just flicked an email off to warren and brown so wait and see if they reply . the machine is a warren and brown (repco ) drillsharpener model 430B in very good nick and complete with all the collets . johno
texx, proud to be a member of MetalworkingFun Forum since May 2014.
03-17-2017, 01:30 AM
I finally found a shaper vice. Spotted it on eBay and hit 'but now' with scarcely a thought of how I was going to retrieve it from Sydney; I was prepared to make the 2-day round trip if necessary. I booked a courier, they lost it, overnight courier ended up taking a week and I picked it up from their depot today.
Someone had gone to the trouble of locating it to the heavy piece of steel plate with a couple of dowel pins. I assume it's been used on a mill and that's the only way they could mount it. I removed the plate and mounted it on the shaper, here it is all dialed in parallel to the ram The jaws are a tad over 9" wide and open to 9 1/2" before fouling the handle- could probably get another inch if I make a deep-socketed handle. The square drive is the same size as the rest of the shaper which is handy- the straight handle that was with the vice gives better leverage than the existing crank and I've found that the ram adjustment has to be done up pretty tight to prevent slipping. This should make that easier. The tag is almost completely illegible- I can just make out the name 'EXCEL' at the top.
Lathe (n); a machine tool used in the production of milling machine components.
Milling Machine (n); a machine tool used in the production of lathe components. |
|
« Next Oldest | Next Newest »
|
Users browsing this thread: 3 Guest(s)