+- MetalworkingFun Forum (http://www.metalworkingfun.com)
+-- Forum: Machinery (http://www.metalworkingfun.com/forum-10.html)
+--- Forum: Milling Machines (http://www.metalworkingfun.com/forum-12.html)
+--- Thread: Couple of cutters I picked up (/thread-2899.html)
Couple of cutters I picked up - Pete O - 10-30-2015
I do love a good clearing sale. Spotted a photo of a basket of horizontal milling cutters in the online catalogue for an auction that was on at a very bad time for me- in between 2 14-hour night shifts- but for my sleep deprivation I came away with enough cutters to make my Victoria U2 universal mill a much more useful thing to have around.
[attachment=12030]
[attachment=12031]
There was another box with a couple of dozen more that was still in the back seat of the car when I took these photos, had forgotten about it. These are just the ones with a 1" keyed arbor hole suitable for my machine, there are a pile of others with different hole sizes / no keyway etc that will go to eBay. Quite a satisfactory haul.
Also picked up a 'project' bandsaw that was too cheap to let go.
RE: Couple of cutters I picked up - Mayhem - 10-30-2015
Nice haul there Pete.
RE: Couple of cutters I picked up - DaveH - 10-30-2015
Wow! and the obligatory
DaveH
RE: Couple of cutters I picked up - Sunset Machine - 10-30-2015
I paid $250 for *one* a couple years back, rare as hen's teeth here.
Wow, what a pile.
RE: Couple of cutters I picked up - RobWilson - 10-30-2015
A very nice haul Pete , you will be well tooled for HZ milling now
Rob
RE: Couple of cutters I picked up - EdK - 10-30-2015
Nice!
Ed
RE: Couple of cutters I picked up - Roadracer_Al - 10-30-2015
Yeah, what those guys said.
RE: Couple of cutters I picked up - Hawkeye - 10-31-2015
Nice haul, Pete. I got nearly that many when I bought my Victoria U2 a few years back. Those are very capable machines. Do you have the vertical head as well?
RE: Couple of cutters I picked up - Pete O - 10-31-2015
Hi Mike, yes I have the vertical head, the one with the fixed spindle. I have thus far only used it to cut a couple of keyways and only with the vertical head, as I haven't yet acquired all the components to set it up in horizontal mode. There were a few arbor spacers amongst this lot of cutters, but I still need more, and I don't have the bushings that run in the arbor supports. I'm also going to have to make a driveshaft for the power feed. All good fun of course. I've been contemplating the possibility of making a slotting head for it as well- don't hold your breath waiting to see that though.
RE: Couple of cutters I picked up - Hawkeye - 11-02-2015
It sounds like you have both arbor supports. Mine only has one, but that hasn't caused any problems.
The power feed shaft on mine may have been a built up one. It looks like a splined shaft with socket-set U-joints welded to the ends. Probably 1/2" drive.