06-21-2012, 05:51 PM
You got Robs camera
Looking very good bob
John
Looking very good bob
John
a new compound slide
|
06-21-2012, 05:51 PM
You got Robs camera
Looking very good bob John
shhhhhh i put it in the box with the other stuff thats why he ant posted out he is looking for it
krv3000, proud to be a member of MetalworkingFun Forum since Feb 2012.
06-23-2012, 05:59 PM
hi all last bit i had a pace of plat 14.5mm thick by 150x 400mm i hand cut this dawn to 105 x 105 then squared this off to 100 x 100mm in the 4 jaw chuck sos no pics of that bit then i marked up and drilled the two front fixing points then set it up in the 4 jaw chuck then made the plate 13mm thick once i Had dun that i marked out the place for the fixing ring then machined that out drilled three fixing points in to the clamping ring and drilled and taped m6 in the bottom of the compound slide bolted all together and all is dun right pics
krv3000, proud to be a member of MetalworkingFun Forum since Feb 2012.
06-23-2012, 06:05 PM
Hi
Bob That looks much better now (did Rob get his camers back) John
06-23-2012, 06:19 PM
Spot on Bob
Rob
06-24-2012, 07:02 AM
Bob,
You "nailed" that Even your paint is shiny Good job DaveH
06-24-2012, 01:20 PM
Excellent Bob, now get a QCTP on it .
Steve
Busy Bee 12-36 lathe, Busy Bee Mill drill, Busy Bee 4x6 bandsaw, Homemade 9x17 bandsaw, Ad infinitum.
06-24-2012, 02:23 PM
hi shhhh i have a project for rob to try out his home billed cnc after all he needs to test it
krv3000, proud to be a member of MetalworkingFun Forum since Feb 2012.
06-24-2012, 04:38 PM
Gotcha Bob, mum's the word.
Busy Bee 12-36 lathe, Busy Bee Mill drill, Busy Bee 4x6 bandsaw, Homemade 9x17 bandsaw, Ad infinitum.
|
« Next Oldest | Next Newest »
|