Coke Forge Build
#11
Hi
Rob
Looking very nice
Most things we build are very heavy YikesYikesYikes
John
Reply
Thanks given by:
#12
That's a very well designed and welded together hearth Rob, it's going to interesting and fun seeing it when it's all done. Are you going to build a sheet metal hood and chimney for it?
tackit, proud to be a member of MetalworkingFun Forum since May 2014.
Reply
Thanks given by:
#13
Looking good Rob.

Not a criticism but a question: was there a reason why you didn't do the cut outs prior to welding it together? I have a common reason for such things and it is called oversight Big Grin I'm just wondering if your reason differs?

I must say that I do enjoy your build threads.
Hunting American dentists since 2015.
Reply
Thanks given by:
#14
Cheers for the comments lads Smiley-eatdrink004

(07-28-2014, 03:34 PM)Micktoon Wrote: Hi Rob , looks like you managed to get a bit more done anyway, it will be starting to get a bit heavy now, are you planning on having it movable or just fixed in one spot once its done ?.
Cheers Mick.

Hi Mick ,aye its slow progress. It will be fixed in one corner of the shop , opposite the furnace .

(07-28-2014, 09:56 PM)tackit Wrote: That's a very well designed and welded together hearth Rob, it's going to interesting and fun seeing it when it's all done. Are you going to build a sheet metal hood and chimney for it?

Hi Tackit , Yes I will be making a hood and also a blower for it , still quite a bit to do .

(07-29-2014, 05:34 AM)Mayhem Wrote: Looking good Rob.

Not a criticism but a question: was there a reason why you didn't do the cut outs prior to welding it together? I have a common reason for such things and it is called oversight Big Grin I'm just wondering if your reason differs?

I must say that I do enjoy your build threads.

Hi Darren , no worries ,fare question and I would not of took it as a criticism we all work in different ways , The reason I did not do the cut outs first is that I am pulling the design out of my arse and making it up as I go Big Grin , and was humming and haring weather or not to put the cut outs in ,so thought I would do them last as I could chalk them on and see if I liked them,size,position etc , and it was no big deal to do them last.


Cheers Rob

PS John you best get your finger out from were the sun dunt shine and build something Popcorn
Reply
Thanks given by:
#15
brill well dun rob
krv3000, proud to be a member of MetalworkingFun Forum since Feb 2012.
Reply
Thanks given by:
#16
(07-29-2014, 11:42 AM)RobWilson. Wrote: ...The reason I did not do the cut outs first is that I am pulling the design out of my arse and making it up as I go Big Grin...

Ah yes - I neglected to mention that one. I have the same approach on a number of projects, including the wheel rim forge I made.
Hunting American dentists since 2015.
Reply
Thanks given by:
#17
Probably the best coal forge I've ever seen was a mobile one posted on IForgeIron. It was just a flat piece of 1/4" checkerplate with a thicker steel fire pot in the middle. No need for sides to get in the way of heating the middle of longer bars, the checkerplate keeps the coal in place.
Arbalest, proud to be a member of MetalworkingFun since Sep 2012.
Reply
Thanks given by:
#18
Cheers Lads

(07-30-2014, 07:11 AM)Mayhem Wrote: I have the same approach on a number of projects, including the wheel rim forge I made.

Any photos Darren Popcorn you do a bit smithing ?


Well a tad more done tonight Big Grin , made a start on the fire pot , this is made from some 1/2 BMS ,STUCK together .

[Image: P1070992_zps9ad8fa73.jpg]

Tacked

[Image: P1070998_zpsc22df00d.jpg]
[Image: P1070999_zpsa7173771.jpg]
[Image: P1080002_zpsb3598ebf.jpg]

Hole in the bottom will be machined in after welding ,as it would not stay round if it were machined in first then welded .

[Image: P1080006_zpsf2e5ef97.jpg]
[Image: P1080008_zps2801ea22.jpg]

Just needs a flange welded on around the top .


Time for a Cuppa .


Rob
Reply
Thanks given by:
#19
Nice job on the fire pot!
Arbalest, proud to be a member of MetalworkingFun since Sep 2012.
Reply
Thanks given by:
#20
Hi
Rob
It is looking good
What are you going to make with it
I like to see hand made hinges door furniture that sort of thing
John
Reply
Thanks given by:




Users browsing this thread: 7 Guest(s)