Todays Project - What did you do today?
(12-28-2016, 12:13 AM)Vinny Wrote: Hey Greg, with that curved ceiling and I-Beam, how do you keep the crane from crashing into the wall?

I don't see why that's a problem. The floor curves in the other direction, so, on average, it's flat.  Rotfl
Mike

SB 10K (1976) Rockwell vertical mill (1967) Rockwell 17" drill press (1946) Me (1949)
Reply
Thanks given by:
(12-27-2016, 07:13 PM)Mayhem Wrote: .......... My memory of growing up in the UK was that it rained nine moths of the year. .........

Seems like it's been upgraded to twelve months of the year now, which is why I'm flying back home to California for awhile next week; with a tool list of course. Happyyes
Mike
Reply
Thanks given by:
Maybe the curve explains why I seam to be going around in circles.
Free advice is worth exactly what you payed for it.
Greg
Reply
Thanks given by:
Made an interesting discovery. After polishing I was using Window cleaner to remove the residue from the cutting compound. Think the ammonia in the cleaner was oxidizing the aluminum. I repolished and washed it off with water.

[Image: 4qtV2icuZ5bn3hllW4MrR89zrXelUWmlS1hnMPZM...8-h1224-no]

Also straightened out the crane rail.
Free advice is worth exactly what you payed for it.
Greg
Reply
Thanks given by:
Yes, that's precisely true: ammonia does oxidize aluminum.
Reply
Thanks given by:
WD-40 works well to cut the greasiness of polishing compounds.  I'm sure plain old kerosene or white gas would work as well, but I happen to have lots of WD-40 around the shop.
Full of ideas, but slow to produce parts
Reply
Thanks given by:
I tried kerosene, it worked great, but I probably should add a layer of wax to keep the shine and thought it might stop the wax from adhering. Too many interactions to consider.
Free advice is worth exactly what you payed for it.
Greg
Reply
Thanks given by:
Yeah, the WD-40 probably would keep the wax from adhering.  Kerosene might not leave as much residue, but it is a petroleum product, so who knows.

Anyway, looks like you've got it under control.  Looks nice.  Now go slap it in the water and make your arms sore!
Full of ideas, but slow to produce parts
Reply
Thanks given by:
I've been pretty fascinated with the advancements in flashlights lately, and bought myself a little something for Christmas. The Astrolux S41 uses four Nichia 219B LED's and puts out around 1600 lumens. And since those LED's have a high CRI index (closer in color to sunlight), it seems even brighter. I opted for a larger 3400 mAh battery which required an extension tube to extend the use and make the body actually large enough to hold. Unfortunately everything showed up except the tube, which is pretty much useless, so I ventured into the shop and made a temporary one until the slow boat from China arrives. It's been a while since I've generated any chips just for fun and it felt pretty good. :)

Tom

[Image: uc?export=download&id=0ByQravynKJtzb0ZBU09WSGpZVEU]

[Image: uc?export=download&id=0ByQravynKJtzQ2tWNFc4TEYwM00]

[Image: uc?export=download&id=0ByQravynKJtzQTNMaXRpb0k4ZEE]

[Image: uc?export=download&id=0ByQravynKJtzNFBTbU95VlM2Snc]
[Image: TomsTechLogo-Profile.png]
Reply
Thanks given by: aRM
oooo brill my I ask wher did you by it from
krv3000, proud to be a member of MetalworkingFun Forum since Feb 2012.
Reply
Thanks given by:




Users browsing this thread: 70 Guest(s)