Couple of cutters I picked up

[Mayhem]

(11-05-2015, 10:23 PM)Pete O Wrote: ...One thing that concerns me about the socket-set UJs is that the cross-pins (in those that I've looked at) seem to be spaced a fair way apart longitudinally, which is how they get the maximum angle, which means that there would be a lot of wobble in the shaft...

I've got a couple of socket UJs that have loosened up and are useless if you are trying to guide a socket onto a hard to reach nut/bolt. I place a fairly heavy spring over them, which keeps them stiff enough that they don't move until I actually get the socket seated and I'm ready to go.

It may work in this application as well...