07-12-2014, 10:33 AM
I'm still waiting to hear back from Kondia regarding the missing hole in the screw, so today I did some baking 
Originally, I polished the handles but they were rust magnets. I cleaned them up and sprayed them with clear coat but it didn't look good (somewhat cloudy) and wore off easily. So, I decided I would powder coat them yellow to match the 9 ball.
The big ones were too big for the quill feed, backgear and feed rate selectors and scaled down versions didn't look good and weren't functional. So I decided on short ones that were the same diameter as the large end on the others. These function well and I'm happy with how they came out.
Originally, I polished the handles but they were rust magnets. I cleaned them up and sprayed them with clear coat but it didn't look good (somewhat cloudy) and wore off easily. So, I decided I would powder coat them yellow to match the 9 ball.
The big ones were too big for the quill feed, backgear and feed rate selectors and scaled down versions didn't look good and weren't functional. So I decided on short ones that were the same diameter as the large end on the others. These function well and I'm happy with how they came out.
Hunting American dentists since 2015.