Darren I'd be curious to see pics of the "quill stop micrometer screw" and where it mounts on the Quill or head.
Does that unthreaded portion where the 6.5mm hole appears fit into an existing hole ? If so is the existing hole 6.5mm?
the 6.5mm hole seems large relative to the unthreaded portion of the screw.
It looks to me that the unthreaded portion of the screw is about 9mm dia. if so, a 6.5mm hole would leave only 1.25mm on each side!
Providing of course the drawing is to scale.
Does that unthreaded portion where the 6.5mm hole appears fit into an existing hole ? If so is the existing hole 6.5mm?
the 6.5mm hole seems large relative to the unthreaded portion of the screw.
It looks to me that the unthreaded portion of the screw is about 9mm dia. if so, a 6.5mm hole would leave only 1.25mm on each side!
Providing of course the drawing is to scale.
Busy Bee 12-36 lathe, Busy Bee Mill drill, Busy Bee 4x6 bandsaw, Homemade 9x17 bandsaw, Ad infinitum.