Fire Wood Processor
#91
Made up a couple of bearing blocks for the arm that will hold the log while its being cut. Bored the housings with the mill, is there a clever way to chamfer the hole when its on the mill.

[Image: IMG_1663.jpg]

The saw bar I ordered arrived. Thats a regular bar beside it for comparison, like to see the person who could weald that thing in the bush all day.
[Image: IMG_1664.jpg]
Free advice is worth exactly what you payed for it.
Greg
Reply
Thanks given by:
#92
[auote] is there a clever way to chamfer the hole when its on the mill[/quote]

Cant you switch to an endmill (or whatever it'd be called) that rounds corners? Either that or a deburring tool.

Are you trying to make that thing that was attached to the front end loader we saw the video of not long ago?
Reply
Thanks given by:
#93
Yah Vinny, same idea as that only a self powered unit. Load the logs onto it with the tractor and let the machines do the work.
I bored the bearing housing out to 1 3/4 with a boring head in this case, when I bore on the lathe its a simple matter of chamfering the edges with a cutter, not easy to switch out the bar in the boring head.
Free advice is worth exactly what you payed for it.
Greg
Reply
Thanks given by:
#94
I have ground an old, chipped brazed carbide boring bar into a blunt "V" - like a threading tool but without the pointy tip - to do chamfers on bores in the mill.

Yes, you have to change the bar to make the chamfer. And, yes, you have to bring the bar to the bottom of the hole, then adjust the cutting diameter at the boring head to make the blind cut. It's easy enough, but not so awesome it seems magical. But it does it in the same setup as the bore.

Feed must be dead slow and lube is good - it's a form tool on the end of a long stick, and will chatter like crazy if you feed too fast.
Reply
Thanks given by: f350ca
#95
Made the hub that the arm will be welded to.
[Image: IMG_1665.jpg]
Free advice is worth exactly what you payed for it.
Greg
Reply
Thanks given by:
#96
Dude - you need a YouTube channel.  Just sayin.....  Thumbsup 
Willie
Reply
Thanks given by: f350ca
#97
Smiley-signs064
Smiley-eatdrink004 
DaveH
Reply
Thanks given by: f350ca
#98
Naw, let's keep him all to ourselves. ( insert smiley sign for GREEDY). Blush

Rotfl

Steve

Smiley-eatdrink004
Busy Bee 12-36 lathe, Busy Bee Mill drill, Busy Bee 4x6 bandsaw, Homemade 9x17 bandsaw, Ad infinitum.
Reply
Thanks given by:
#99
(04-03-2015, 12:59 PM)stevec Wrote: Naw, let's keep him all to ourselves. ( insert smiley sign for GREEDY). [Image: rubbing-hands-in-excitement-smiley-emoticon.gif]

Rotfl

Steve

Smiley-eatdrink004

How's that Steve?  Smile
Willie
Reply
Thanks given by:
Purrfect!
Busy Bee 12-36 lathe, Busy Bee Mill drill, Busy Bee 4x6 bandsaw, Homemade 9x17 bandsaw, Ad infinitum.
Reply
Thanks given by:




Users browsing this thread: 2 Guest(s)