A student project
#1
I posted this some time ago on H-M but I think it is worth a repeat here.
Its a project I did with First year motor vehicle students on a full time course. I had them for 1 day a week.
The idea was to build a car to celebrate the 100 year anniversary of the motor car. The work was split into two parts over two years.
I will start with a photo of the finished car so you know the objective.

   

Feel free to ask questions.
Brian.
Brian, proud to be a member of MetalworkingFun since Sep 2012.
http://briansworkshop.weebly.com Welcome
Reply
Thanks given by:
#2
Hi Brian, That look really good and period, it looks like the kids took to the project. I look forward to seeing how it wasbuilt.

Thanks for posting Cheers Mick
Micktoon, proud to be a member of MetalworkingFun since Sep 2012.
Reply
Thanks given by:
#3
The objective for the first year of the project was to build a engine..
to give the work a start I provided a cylinder liner and piston from a 2000cc 4 cyl engine. From this the class had to calculate the stroke and crank throw needed to make a 500cc engine.
After a visit to the Science Museum. in London, a rough layout of the engine was made, then we started cutting metal.

   

First the Shaper.

   

Then the lathe.

   

Gradually a pile of parts started to emerge. ( Note that each major unit is

separate, this is to accommodate the errors )

   

   

   

Limits and fit's ???????? Lets just get on and make it, after all we only have 30 days to make a running engine.

Brian.
Brian, proud to be a member of MetalworkingFun since Sep 2012.
http://briansworkshop.weebly.com Welcome
Reply
Thanks given by:
#4
6820
Hunting American dentists since 2015.
Reply
Thanks given by:
#5
Smiley-signs021
Reply
Thanks given by:
#6
Sign0087
Smiley-eatdrink004
DaveH
Reply
Thanks given by:
#7
Having established what the bore and stroke was the lads calculated the
size of the combustion chamber to give a modest 4-1 compression ratio.
Then we started on the cylinder head. the water jacket was milled in the top ,leaving support for the valve guides and enough area to allow the gasket to seal.

   

The combustion chamber was turned out and the ports cut on the mill.

   


Most of the lads preferred to use the larger machines in the shop when they had the option.

   

Brian.
Brian, proud to be a member of MetalworkingFun since Sep 2012.
http://briansworkshop.weebly.com Welcome
Reply
Thanks given by:
#8
The connecting rod was milled from 1" steel plate.
   

   

   

Then built up with the fly wheels using a temporary crank pin until we balanced it.

   

   


Brian.
Brian, proud to be a member of MetalworkingFun since Sep 2012.
http://briansworkshop.weebly.com Welcome
Reply
Thanks given by:
#9
Absolutely awesome work.

"Billy G"
Reply
Thanks given by:
#10
Smiley-signs064
Smiley-eatdrink004
DaveH
Reply
Thanks given by:




Users browsing this thread: 3 Guest(s)