Let's See Your Lathe
Would it really matter if I used different gears so long as they were all the same type? As I understand it as long as the ratio's are the same the end result should be the same. All I have to do is match the bore to fit the leadscrew and drive from the tumbler and also hope the overall gear size is near enough so that everything reaches from the tumbler acros the banjo and on to the lead screw, a myford gear would be much too small.
Or am I getting things very wrong ?
Reply
Thanks given by:
No, that should work. Try to stay close to module 1.6 (like 1.5 or 1.75) so they fit.
Logan 200, Index 40H Mill, Boyer-Shultz 612 Surface Grinder, HF 4x6 Bandsaw, a shear with no name, ...
the nobucks boutique etsy shop  |  the nobucks boutique
Reply
Thanks given by: Andy T
                           
Got it all back together and very pleased with the result, it's a very chunky and sturdy machine and every thing moves smoothly, I only replaced the taper roller bearing at the back end of the main spindle and all's fine.
Reply
Thanks given by:
Nice work Andy - now go and get it all filthy Big Grin
Hunting American dentists since 2015.
Reply
Thanks given by: Andy T
Got to get a motor hooked up first then get some tooling. Thinking about getting a quick change tool post, also need centers for the tailstock and a chuck key would help, what you see in the pics is all I got when I purchased it.
Reply
Thanks given by:
How 'bout building a glass coffee table under which the lathe would be on display?   Smiley-signs107
Reply
Thanks given by:
(05-18-2017, 09:20 AM)Dr Stan Wrote: How 'bout building a glass coffee table under which the lathe would be on display?   Smiley-signs107

Not a bad idea, an option is to sell on as is and that may increase the value !
Reply
Thanks given by:
Looks good Andy!!!
Logan 200, Index 40H Mill, Boyer-Shultz 612 Surface Grinder, HF 4x6 Bandsaw, a shear with no name, ...
the nobucks boutique etsy shop  |  the nobucks boutique
Reply
Thanks given by:
good evening

Follows the photo of my lathe; I bought it for 3 years and I have learned a lot from the site readings.

thank you !!


Attached Files Thumbnail(s)
   
Reply
Thanks given by:
Sometimes everything comes together around the same time.....


On the weekend I sold my old 9" Hercus given to me by my father-in-law 30 years ago.
Yesterday I picked up a new (to me) old mill.
The new step-up transformer for my RPC build arrived today, so to tonight I was able to get the RPC running well enough to take a couple of test cuts on the 1987 Takisawa TSL1000D I bought late last year.
Compared to the flogged out pensioned off from a community training school Hercus, the well used Takisawa is amazing. I'm hanging out to use it for a real project, but have some higher priority jobs to get out of the way first Sadno


   

   

Steve
Reply
Thanks given by:




Users browsing this thread: 6 Guest(s)