5 Cylinder Radial
Wow! Very nice work Brian. Thumbsup

Ed
Reply
Thanks given by:
You have been very busy... nice work Brian
Magazines have issues, everything else has problems

Reply
Thanks given by:
The next part to receive attention is the cam shaft so I parted of to length 4 pieces of stainless and centred the ends.
     

Then up between centres to rough down to size using my favourite tool .

   
 
Then clean up the edges.


      

And start setting up the mill to form the cam.


             

I may try to video this opp we will see how it goes.
Brian. Smiley-dancenana
Brian, proud to be a member of MetalworkingFun since Sep 2012.
http://briansworkshop.weebly.com Welcome
Reply
Thanks given by:
Well the video is done so lets see if it works.

brian.



Brian, proud to be a member of MetalworkingFun since Sep 2012.
http://briansworkshop.weebly.com Welcome
Reply
Thanks given by:
Great video Brian
Free advice is worth exactly what you payed for it.
Greg
Reply
Thanks given by:
Well done Brian. You did an excellent job of explaining a complicated machining operation in a way that a novice could understand.

Tom
[Image: TomsTechLogo-Profile.png]
Reply
Thanks given by:
Nice work, made it look and sound easy.
Lathe (n); a machine tool used in the production of milling machine components.

Milling Machine (n); a machine tool used in the production of lathe components.
Reply
Thanks given by:
After the cams come the cam boxes.
First job was to part off the material to length an drill and bore the inside dimensions.

 
   

Then make the end caps.
  

   

Ready to do the outside.

      

At this point I decided that a change of tooling may speed up the job so I changed to the fly cutter fitted with a indexable tool from the lathe.



     

Very happy with the results.
   
Brian. Smiley-dancenana
Brian, proud to be a member of MetalworkingFun since Sep 2012.
http://briansworkshop.weebly.com Welcome
Reply
Thanks given by:
Lookin good!!
Logan 200, Index 40H Mill, Boyer-Shultz 612 Surface Grinder, HF 4x6 Bandsaw, a shear with no name, ...
the nobucks boutique etsy shop  |  the nobucks boutique
Reply
Thanks given by:
Todays work was to cut the holes for the cam followers.





      

The next job will be to cut the access holes in the side of the cambox,  cylinder's No's 1 5 4 have them on the right
No's 2 3 on the left looking from the front of the engine.
Brian. Smiley-dancenana
Brian, proud to be a member of MetalworkingFun since Sep 2012.
http://briansworkshop.weebly.com Welcome
Reply
Thanks given by:




Users browsing this thread: 1 Guest(s)